Routing 0 Guage Wire, From Batt To Boot In Aygo?

[Ammo_Singh]

hi guys,

got a problem...

im installing some subs and need to know how i can route a thick 0awg wire, from the Battery to the boot.

ive had a look at routing small wires from the drivers footwell. but dont think there room for a 0awg.

anyone had any experience with this???

id prefer not to have to drill a new hole.

any help at all is appreciated.

thanks

[weevicky]

Route it through the hole at the drivers sude under the steering wheel... then under the door seals and behind the plastic :)

[Jan van de Wouw]

0awg as in "zero gauge"? So the wire being something like half an inch thick?

You might want to look at routing it past the heater-lines in the center of the car,

as the proposed locations for wiring the foglights and such will only accomodate

a quarter inch (5 AWG) at best by my judgement...

[BadBoyVTEC]

I have 4 gauge in my motor and it work throughh the normal wiring grommet in the bulkhead. The biggest squeeze were the bars where the seats bolt down next to the door seals.