Updated Photos Of The T-sport

[farhanali89]

Right i went for a little photo shoot yesterday night. Also had a few pms about my cold air feed and heatshield so i have uploaded a variety of photos! let me know what you think or any suggestions to improve?

Right there you have it! i also have to take a close up of the window deflectors for t-sport786

will do that tomorow in the day time.

The heatshield is a universal E-tech heatshield. It helps a fair bit i have driven for a good while and noticed it reduces heat onto the induction kit well. Considering right below i have a cold air feed so there is better cold air to the engine.

I have left the original cold air pipe that went to the standard airbox aswell so it must be doing some kind of magic lol.

The wheels are - buddy club p1 racing 2 in gunmetal

My headlights are 6000k hids with blue led sidelights.

[ponzer]

Niiice :)

Nice wheel combo for your black rolla ;)

[t-sport786]

The second cold air feed you'v added does it make a diff like have you noticed any? im using the original one i havent removed that either even tho it said in the instructions to remove it lol, other than that the cars looking good man the wheels really set it off. I'v bin after some ultraleggeras but theyr proving to be costly esp with a tyre upgrade ima start looking into some others now.

[Norfolk n Chance]

What's the fitment on the heatshield?

Been looking for a while for one for my A'PEXi

[Ckman85]

Looking NICE man. GOD the front of ur car is soo low, u must of scraped it a few times ;) So wots next for ur car?

[-T- Sport]

Did you get that Heatshield from eBay?

If so, Was it a seller named Waxacar?

[farhanali89]

The second cold air feed you'v added does it make a diff like have you noticed any? im using the original one i havent removed that either even tho it said in the instructions to remove it lol, other than that the cars looking good man the wheels really set it off. I'v bin after some ultraleggeras but theyr proving to be costly esp with a tyre upgrade ima start looking into some others now.

The cold air feed i put it does help...when i had the car without it and just the typhoon, over time the car would feel sluggish, in general its hard to tell because the improvement will be so small. But it is worth doing it as its cheap and it does provide cold air. I certainly feel better pull in 4th gear.

What's the fitment on the heatshield?

Been looking for a while for one for my A'PEXi

norfolk its a universal fitment so it will fit between the little clamp that holds your filter to your induction pipe. It comes as a flatt bit of paper with 3 little things that go between the clamp. You can then bend it to the exact size of your filter which is really good.

Looking NICE man. GOD the front of ur car is soo low, u must of scraped it a few times ;) So wots next for ur car?

im not to sure i managed to sort out my rear lip at the body shop had it modified like the compressor lip. Got a full carzone fibreglass rear lip and told them to modify it like the compressor lip and they did a great job. I havent proceeded with that yet as i want to do the exhaust and lip together. but tints and a bit more lowering at the back is a neccesity. i had a look at your car on tsowners it looked really good tte front bumper etc keep it up!

Did you get that Heatshield from Ebay?

If so, Was it a seller named Waxacar?

yep the seller was waxacar

[-T- Sport]

Waxacar is about 500 meters from my house.

Now I know that he sells them I'll walk down and pester him later on in the week! No need to pay Delivery then! hehe.

[Norfolk n Chance]

What's the fitment on the heatshield?

Been looking for a while for one for my A'PEXi

norfolk its a universal fitment so it will fit between the little clamp that holds your filter to your induction pipe. It comes as a flatt bit of paper with 3 little things that go between the clamp. You can then bend it to the exact size of your filter which is really good.

Clamp? Hmm.. in that case i'd need to get a jubilee clip to attach it to the intake pipe as the A'PEXi filter screws onto it ;)

[-T- Sport]

Oh nose!!!! that'll cost you a fortune!!! :P

[farhanali89]

sorry guys i couldnt identify the difference between a clamp and a jubilee clip! right guys youll need a jubilee clip. If your induction kit already has one then your fine to use it.

[waldo87]

have you had to extend the wires for the air flow meter?

[farhanali89]

nopeeee! didnt need to was a tight fit but i did it very carefully.

[cabcurtains]

nopeeee! didnt need to was a tight fit but i did it very carefully.

It thought i had done it carefully until the curse struck!

I have the same heatshield and a similiar cold air feed, if it makes much difference i cant tell, makes me feel better though :D

[farhanali89]

nopeeee! didnt need to was a tight fit but i did it very carefully.

It thought i had done it carefully until the curse struck!

I have the same heatshield and a similiar cold air feed, if it makes much difference i cant tell, makes me feel better though :D

right that means i better invest in a replacement maf thingy if the little wire goes! so when it does go i can go out and change it rather than drive to toyota freak out wait for the part then fix it lolol.

same the cold air feed and heatshield make me feel m uch better LOL

[kangzy]

nice wheels bro!

ye definately invest in extending da wires.. trust me given the trouble iv had!

so when are we gona meet up??

[farhanali89]

nice wheels bro!

ye definately invest in extending da wires.. trust me given the trouble iv had!

so when are we gona meet up??

any time after xmas or on the weekends we should arrange something! cant wait for work holidays going to be working on the car all day everyday! arrange a place kangzy which would be suitable for everyone

[cabcurtains]

nice wheels bro!

ye definately invest in extending da wires.. trust me given the trouble iv had!

so when are we gona meet up??

any time after xmas or on the weekends we should arrange something! cant wait for work holidays going to be working on the car all day everyday! arrange a place kangzy which would be suitable for everyone

Meadowhall?

[nrgizerbunny]

i'd be up for meadowhall,

farhan, do you leave that fuse dangling about!

[farhanali89]

i'd be up for meadowhall,

farhan, do you leave that fuse dangling about!

:) yea lololol i dont know where to locate it! any ideas? or where to mount it to?

meadowhall let me have a talk with some of the lads and implement a new thread tomorow to gain interest on this forum and the ts owners forum to!

[AE_92]

NICE i like! if i was you i would put some te37's on it would look sick :P But them buddys look cool too

[farhanali89]

the te37 are nice! I went for these because i like the thinner spokes showing the brakes. Jap style rims are the best!

[AE_92]

the te37 are nice! I went for these because i like the thinner spokes showing the brakes. Jap style rims are the best!

Yep JDM all the way bro

[johnyboy1976]

Very nice car you have mate-ill be on the look out for a nice CTS in the next few months as a daily runner for the mrs and kids.

Nice alloys-i have the same but in 18" and gold on my GT4.

does anyone make a carbon bonnet for the T sport??

Got a few mods lined up for when we get one-want Tein coilovers,TRD front and rear strut braces and Whiteline F & R ARB's but not seen a carbon bonnet :(

[Norfolk n Chance]

Very nice car you have mate-ill be on the look out for a nice CTS in the next few months as a daily runner for the mrs and kids.

Nice alloys-i have the same but in 18" and gold on my GT4.

does anyone make a carbon bonnet for the T sport??

Got a few mods lined up for when we get one-want Tein coilovers,TRD front and rear strut braces and Whiteline F & R ARB's but not seen a carbon bonnet :(

TRC Tuning