Corolla E12 Jack/axle Stand Points

[TAF]

As per title, im going to be changing dics and pads front and back on my car fairly soon, just wondering where the best point is for the jack and stands... ive heard about the jacking point on the front, not too sure about jacking point for the back or the best place for stands.... any pics u guys may have would be apreciated ;)

thanks in advance!

[LAA69]

Boot jack, supplied jack etc points just inside of each wheel along sils.

Trolley jack, i jack against the Chasis box sections underneith which is where i also stick Axle Stands.

Sorry no pics. Never had any issues or concerns.

[simon_srwp]

Sorry if I am too late...

I did my front discs and pads last week on my E12. jack the car up in the middle with a trolley jack and put the axle stands on the ridge down the side between the two notches... It's where you put the jack to change a tyre.

This tutorial showed me how to do it... Take a look, it saved me £200 quid!

http://toyotaownersclub.com/forums/index.php?showtopic=56738

[TAF]

This tutorial showed me how to do it... Take a look, it saved me £200 quid!

http://toyotaownersclub.com/forums/index.php?showtopic=56738

Thats a good write up... full marks to the member for doing that!!!

Simon - havent had a chance to do mine done yet... the corolla isnt my main car plus ive been lazy in gettin the parts! which leads me to my next question.. where'd you get your disks/pads from and how much if you dont mind me asking? ive got the 1.6 aswell